Previous What Is Live Resin?
Action Bronson’s Cable Food Show T... Next

A State-by-State Guide to Cannabis Packaging and Labeling Laws

Proper cannabis labeling and packaging is a crucial component to staying in compliance with state guidelines. Cannabis companies must ensure that their packages are tamper-proof, child-proof, and within accordance of their local laws. Unfortunately, because the laws are constantly changing, businesses are forced to keep up with the perpetual tweaks being made to remain in compliance and to protect the safety and security of the general public.

We put together this state-by-state guide to cannabis packaging and labeling laws to give cannabis businesses an understanding of which guidelines they must adhere to and where they can find additional information about their state's packaging and labeling restrictions. We'll continue to update this guide as the rules continue to change, but if you have any questions about your state's laws, please refer to the link included under each state's breakdown for its full text of guidelines.


ALASKA

Alaska's cannabis labeling and packaging guidelines include the following:

3 AAC 306.345. Packaging and labeling.

(a) A retail marijuana store shall assure that:

  • (3) any marijuana or marijuana product sold at a retail marijuana store must be packaged in opaque, re-sealable, child-resistant packaging when the purchaser leaves the retail premises; the packaging must be designed or constructed to be significantly difficult for children under five years of age to open; but not normally difficult for adults to use properly.
    • (b) In addition to labeling requirements provided in (a) of this section, a retail marijuana store shall affix a label to each package of marijuana or marijuana product that
      • (1) identifies the marijuana retail store selling the marijuana product by name or distinctive logo and marijuana establishment license number; and
      • (2) states the total estimated amount of THC in the labeled product, and (3) contains the following statements:
        • (A) "Marijuana has intoxicating effects and may be habit forming and addictive;"
        • (B) "Marijuana impairs concentration, coordination, and judgment. Do not operate a vehicle or machinery under its influence;"
        • (C) "There are health risks associated with consumption of marijuana”
        • (D) "For use only by adults twenty-one and older. Keep out of the reach of children;" and
        • (E) “Marijuana should not be used by women who are pregnant or breast feeding;” 

For more information, please refer to the full text of the Act to Tax and Regulate the Production, Sale and Use of Marijuana.

 

ARIZONA

Arizona's cannabis labeling and packaging guidelines include the following:

  • Child-resistant packaging

For more information, please refer to the Arizona Department of Health Services for Medical Marijuana.

 

CALIFORNIA

Assembly Bill 266 was passed and includes the following regulations for packaging and labeling:

(a) Prior to delivery or sale at a dispensary, medical cannabis products shall be labeled and in a tamper-evident package. Labels and packages of medical cannabis products shall meet the following requirements:

  • (1) Medical cannabis packages and labels shall not be made to be attractive to children.
  • (2) All medical cannabis product labels shall include the following information, prominently displayed and in a clear and legible font:(b) Only generic food names may be used to describe edible medical cannabis products.
    • (A) Manufacture date and source.
    • (B) The statement “SCHEDULE I CONTROLLED SUBSTANCE.”
    • (C) The statement “KEEP OUT OF REACH OF CHILDREN AND ANIMALS” in bold print.
    • (D) The statement “FOR MEDICAL USE ONLY.”
    • (E) The statement “THE INTOXICATING EFFECTS OF THIS PRODUCT MAY BE DELAYED BY UP TO TWO HOURS.”
    • (F) The statement “THIS PRODUCT MAY IMPAIR THE ABILITY TO DRIVE OR OPERATE MACHINERY. PLEASE USE EXTREME CAUTION.”
    • (G) For packages containing only dried flower, the net weight of medical cannabis in the package.
    • (H) A warning if nuts or other known allergens are used.
    • (I) List of pharmacologically active ingredients, including, but not limited to, tetrahydrocannabinol (THC), cannabidiol (CBD), and other cannabinoid content, the THC and other cannabinoid amount in milligrams per serving, servings per package, and the THC and other cannabinoid amount in milligrams for the package total.
    • (J) Clear indication, in bold type, that the product contains medical cannabis.
    • (K) Identification of the source and date of cultivation and manufacture.
    • (L) Any other requirement set by the bureau.
    • (M) Information associated with the unique identifier issued by the Department of Food and Agriculture pursuant to Section 11362.777 of the Health and Safety Code.

For more information on California’s regulations, see the Guidelines for the Security and Non-Diversion of Marijuana Grown for Medical Use, and the SF Medical Cannabis Dispensary Regulations.

 

COLORADO

Colorado's cannabis labeling and packaging guidelines state that before sale to a consumer, a retail marijuana store must place any cannabis products in a container that adheres to the following restrictions:

  • Is child-resistant or is placed into an "exit package" that is child-resistant;
  • Is opaque;
  • Is closable if not intended for single use;
  • Is properly labeled pursuant to the Colorado Retail Marijuana CodeIncludes Colorado's Universal THC Symbol
    • The packaging may not be designed to appeal to children
    • The labeling makes no false or misleading statements regarding health or physical benefits to the consumer
    • Labeling text is no smaller than 1/16 of an inch
    • Labeling text must be clearly written or printed and in the English language
    • Labeling text must be unobstructed and conspicuous

Additionally, containers for edible marijuana products must be labeled with all ingredients.

For more information, please refer to both the Colorado Retail Marijuana Code, which includes additional guidelines for shipping containers, contaminant and potency testing, and more, as well as Colorado’s Packaging & Labeling Requirements For Retail Marijuana for Consumer Protection and Child Safety.

 

CONNECTICUT

Connecticut's cannabis labeling and packaging guidelines come from Sec. 21a-408-56 of its regulations:

  • A producer shall individually package, label, and seal marijuana products in unit sizes such that no single unit contains more than a one-month supply of marijuana.
  • A producer shall place any product containing marijuana in a child-resistant and light-resistant package.
  • A producer shall label each marijuana product prior to sale to a dispensary and shall securely affix to the package a label that states in legible English:
    • (1) The name and address of the producer;
    • (2) The brand name of the marijuana product that was registered with the department;
    • (3) A unique serial number that will match the product with a producer batch and lot number so as to facilitate any warnings or recalls the department or producer deem appropriate;
    • (4) The date of final testing and packaging;
    • (5) The expiration date;
    • (6) The quantity of marijuana contained therein;
    • (7) A terpenes profile and a list of all active ingredients, including:
      • (A) tetrahydrocannabinol (THC);
      • (B) tetrahydrocannabinol acid (THCA);
      • (C) cannabidiol (CBD); (D) cannabidiolic acid (CBDA); and
      • (E) any other active ingredient that constitute at least 1% of the marijuana batch used in the product.
    • (8) A pass or fail rating based on the laboratory’s microbiological, mycotoxins, heavy metals, and chemical residue analysis.

For more information, please refer to the State of Connecticut Regulation of the Department of Consumer Protection Concerning Palliative Use of Marijuana.

 

DELAWARE

Delaware's cannabis labeling and packaging guidelines include a description of the packaging of the useable marijuana that the compassion center shall be utilizing which shall, a minimum, include:

  • The name of the strain, batch, and quantity;
  • The statement “this product is for medical use only, not for resale;”
  • Details indicating
    • (1) the medical marijuana is free of contaminants, and
    • (2) the levels of active ingredients in the product.

For more information, please refer to 4470 State of Delaware Medical Marijuana Code.

 

DISTRICT OF COLUMBIA

Washington D.C.'s cannabis labeling and packaging guidelines state that no medical marijuana shall be dispensed or distributed to a qualifying patient or caregiver unless the container in which it is distributed bears a legible label, firmly affixed, stating the following information:

  • (a) The name of the cultivation center where the medical marijuana was produced;
  • (b) The name of the dispensary where the medical marijuana was dispensed;
  • (c) The quantity of medical marijuana contained within;
  • (d) The cannabinoid profile of the medical marijuana contained within, including the THC level;
  • (e) Any other ingredient or ingredients besides medical marijuana contained within;
  • (f) The name of the recommending physician;
  • (g) The dispensing date that the medical marijuana was transferred to the qualified patient or caregiver;
  • (h) The qualifying patient’s name and registration card number; and
  • (i) A statement that the product is for medical use and not for resale or transfer to another person.

For more information, please refer to the D.C. Municipal Regulations and D.C. Register.

HAWAII

Hawaii's cannabis labeling and packaging guidelines come from Hawaii House Bill 321:

  • (a) The department shall establish standards regarding the advertising and packaging of medical marijuana products; provided that the standards, at a minimum, shall require the use of packaging that:(b) Any lozenge, capsule, or pill containing medical marijuana or its principal psychoactive constituent tetrahydrocannabinol shall be packaged so that one dose, serving, or single wrapped item contains no more than ten milligrams of tetrahydrocannabinol.
    • (1) Is child-resistant and opaque so that the product cannot be seen from outside the packaging;
    • (2) Is clearly labeled with the phrase "For medical use only"; and
    • (3) Contains information about the contents and potency of the product.

For more information, please refer to House Bill 321 Relating to Medical Marijuana.

 

ILLINOIS

Illinois' cannabis labeling and packaging guidelines include the following:

  • Each cannabis product produced for sale shall be registered with the Department on forms provided by the Department.
  • a) Each product registration shall include a label and the required registration fee (Section 1000.140). The registration fee is for the name of the product offered for sale, and one fee shall be sufficient for all package sizes.
  • b) All harvested cannabis intended for distribution to a dispensing organization must be packaged in a sealed and labeled medical cannabis container.
  • c) Packaging of any product containing cannabis shall be child-resistant and light-resistant consistent with current standards, including the Consumer Product Safety Commission standards referenced by the Poison Prevention Act.
  • d) Each cannabis product shall be labeled by the cultivation center prior to sale to a dispensary, and each label shall be securely affixed to the package and shall state in legible English:9) A statement that the product is for medical use and not for resale or transfer to another person.
    • 1) The name and P.O. Box of the registered cultivation center where the item was manufactured;
    • 2) The common or usual name of the item and the registered name of the cannabis product that was registered with the Department pursuant to subsection (a);
    • 3) A unique serial number that will match the product with a producer batch and lot number to facilitate any warnings or recalls the Department or producer deems appropriate;
    • 4) The date of final testing and packaging, if sampled, and the identification of the independent testing laboratory;
    • 5) The date of manufacture and "use by" date;
    • 6) The quantity (in ounces or grams) of cannabis contained in the product;
    • 7) A pass/fail rating based on the laboratory's microbiological, mycotoxins, and pesticide and solvent residue analyses, if sampled;
    • 8) Content List
      • A) A list of the following, including the minimum and maximum percentage content by weight for subsections (d)(8)(A)(i) through (iv):
        • i) delta-9-tetrahydrocannabinol (THC);
        • ii) tetrahydrocannabinolic acid (THCA);
        • iii) cannabidiol (CBD);
        • iv) cannabidiolic acid (CBDA); and
        • v) any other ingredients besides cannabis.
    • B) The acceptable tolerances for the minimum percentage printed on the label for any of subsections (d)(8)(A)(i) through (iv) shall not be below 85% or above 115% of the labeled amount;

For more information, please refer to the General Provisions for the Compassionate Use of Medical Cannabis Pilot Act.

 

MAINE

Maine's cannabis labels on prepared marijuana and goods containing marijuana that are sold by dispensaries and caregivers are used as evidence of compliance with the law that limits possession and dispensing to 2.5 ounces of prepared marijuana per qualifying patient. The packaging and labeling of prepared marijuana and marijuana products for sale by registered dispensaries and caregivers must comply with applicable State labeling laws. See 22 M.R.S.A. §2157.

For more information, please refer to the Rules Governing the Maine Medical Use of Marijuana Program.

 

MARYLAND

Maryland's cannabis labeling and packaging guidelines include the following:

  • .01 Packaging of Medical Cannabis Finished Product.

    A. All items shall be individually packaged at the original point of processing.

    B. Packaging Requirements. A package of medical cannabis finished product shall:

    (1) Be plain;

    (2) Be opaque;

    (3) Be tamper-evident, and if applicable or appropriate, child-resistant;

    (4) Bear a finished-product lot number and an expiration date;

    (5) Bear a clear warning that:

    (a) The contents may be lawfully consumed only by a qualifying patient named on an attached label;

    (b) It is a illegal for any person to possess or consume the contents of the package other than the qualifying patient; and

    (c) It is a illegal to transfer the package or contents to any person other than a transfer by a caregiver to a qualifying patient;

    (6) Bear a clear warning to keep the package and its contents away from children other than a qualifying patient;

    (7) Bear the Maryland Poison Control Center emergency telephone number;

    (8) Bear the name of the licensee that packaged the medical cannabis finished product and the telephone number of the licensee for reporting an adverse patient event;

    (9) Bear any allergen warning required by law;

    (10) Bear a listing of the non-medical cannabis ingredients;

    (11) Bear an itemization, including weight, of all cannabinoid and terpene ingredients specified for the product, and concentrates of any cannabinoid of less than one percent shall be printed with a leading zero before the decimal point; and

    (12) Leave space for a licensed dispensary to attach a personalized label for the qualifying patient.

    C. Packaging Prohibitions. A package of medical cannabis finished product may not bear any:

    (1) Resemblance to the trademarked, characteristic or product-specialized packaging of any commercially available candy, snack, baked good or beverage;

    (2) Statement, artwork or design that could reasonably mislead any person to believe that the package contains anything other a medical cannabis finished product;

    (3) Seal, flag, crest, coat of arms, or other insignia that could reasonably mislead any person to believe that the product has been endorsed, manufactured, or used by any State, county or municipality or any agency thereof; and

    (4) Cartoon, color scheme, image, graphic or feature that might make the package attractive to children.

For more information, please refer to the Subtitle 62 of the Maryland Department of Health & Mental Hygiene

 

MASSACHUSETTS

Massachusetts' cannabis labeling and packaging guidelines include the following:

  • (E) Packaging and Labeling
    • (1) Marijuana shall be packaged in plain, opaque, tamper-proof, and child-proof containers without depictions of the product, cartoons, or images other than the RMD’s logo. Edible MIPs shall not bear a reasonable resemblance to any product available for consumption as a commercially available candy.
    • (2) Labeling of Marijuana (Excluding MIPs). The RMD shall place a legible, firmly affixed label on which the wording is no less than 1/16 inch in size on each package of marijuana that it prepares for dispensing, containing at a minimum the following information:
      • (a) The registered qualifying patient’s name;
      • (b) The name and registration number of the RMD that produced the marijuana, together with the RMD’s telephone number and mailing address, and website information, if any;
      • (c) The quantity of usable marijuana contained within the package;
      • (d) The date that the RMD packaged the contents;
      • (e) A batch number, sequential serial number, and bar code when used, to identify the batch associated with manufacturing and processing;
      • (f) The cannabinoid profile of the marijuana contained within the package, including THC level;
      • (g) A statement that the product has been tested for contaminants, that there were no adverse findings, and the date of testing in accordance with 105 CMR 725.105(C)(2); and
      • (h) This statement, including capitalization: “This product has not been analyzed or approved by the FDA. There is limited information on the side effects of using this product, and there may be associated health risks. Do not drive or operate machinery when under the influence of this product. KEEP THIS PRODUCT AWAY FROM CHILDREN.”
    • (3) Labeling of MIPs. The RMD shall place a legible, firmly affixed label on which the wording is no less than 1/16 inch in size on each MIP that it prepares for dispensing, containing at a minimum the following information:
      • (a) The registered qualifying patient’s name;
      • (b) The name and registration number of the RMD that produced the MIP, together with the RMD’s telephone number and mailing address, and website information, if any;
      • (c) The name of the product;
      • (d) The quantity of usable marijuana contained within the product as measured in ounces;
      • (e) A list of ingredients, including the cannabinoid profile of the marijuana contained within the product, including the THC level;
      • (f) The date of product creation and the recommended “use by” or expiration date;
      • (g) A batch number, sequential serial number, and bar code when used, to identify the batch associated with manufacturing and processing;
      • (h) Directions for use of the product if relevant;
      • (i) A statement that the product has been tested for contaminants, that there were no adverse findings, and the date of testing in accordance with 105 CMR 725.105(C)(2);
      • (j) A warning if nuts or other known allergens are contained in the product; and
      • (k) This statement, including capitalization: “This product has not been analyzed or approved by the FDA. There is limited information on the side effects of using this product, and there may be associated health risks. Do not drive or operate machinery when under the influence of this product. KEEP THIS PRODUCT AWAY FROM CHILDREN.”

For more information, please refer to the Implementation of an Act for the Humanitarian Medical Use of Marijuana.

 

MICHIGAN

Michigan currently has no cannabis labeling and packaging requirements.

For more information, please refer to the Michigan Medical Marihuana Program.

 

MINNESOTA

Minnesota's cannabis labeling and packaging guidelines include the following:

  • 4770.0850 PACKAGING AND LABELING. Subpart 1. Medical cannabis packaging. The medical cannabis manufacturer must package all medical cannabis intended for distribution according to the following standards:
  • A. In addition to the requirements in Minnesota Statutes, section 152.29, subdivision 3, paragraph (c), clause (5), medical cannabis containers must be:B. Medical cannabis packaging must not bear a reasonable resemblance to any commercially available product.
    • (1) plain;
    • (2) designed to maximize the shelf life of contained medical cannabis;
    • (3) tamper-evident; and
    • (4) child-resistant.
  • C. Medical cannabis packaging must be packaged to minimize its appeal to children and must not depict images other than the medical cannabis manufacturer's business name logo. Subp. 2. Medical cannabis trade names. The medical cannabis manufacturer's medical cannabis trade names must comply with the following standards and are subject to approval by the commissioner:B. Labeling text must not include any false or misleading statements regarding health or physical benefits to the patient.
    • A. names that are limited to those that clearly reflect the product's medical cannabis nature;
    • B. any name that is identical to, or confusingly similar to, the name of an existing non-cannabis product is prohibited;
    • C. any name that is identical to, or confusingly similar to, the name of an unlawful product or substance is prohibited; and
    • D. any name that contains language that suggests using medical cannabis for recreational purposes or for a condition other than a qualifying medical condition is prohibited. Subp. 3. Labeling. A. A medical cannabis manufacturer must ensure that all medical cannabis that is distributed is labeled with the following information:
      • (1) the patient's registry identification number, name, and date of birth;
      • (2) the name and date of birth of the designated registered caregiver, if applicable;
      • (3) the name of the patient's parent or legal guardian, if listed on the registry verification, if applicable;
      • (4) the patient's address;
      • (5) the name and address of the medical cannabis manufacturer where the medical cannabis was manufactured;
      • (6) the medical cannabis's chemical composition;
      • (7) the recommended dosage;
      • (8) directions for use of the product;
      • (9) all ingredients of the product shown with common or usual names, including any colors, artificial flavors, and preservatives, listed in descending order by predominance of weight;
      • (10) the date of manufacture and batch number;
      • (11) a notice with the statement, including capitalization: "This product has not been analyzed or approved by the United States Food and Drug Administration. There is limited information on the side effects of using this product, and there may be associated health risks. Do not drive or operate heavy machinery when under the influence of this product. KEEP THIS PRODUCT OUT OF REACH OF CHILDREN."; and
      • (12) a notice with the statement: "This medical cannabis is for therapeutic use only. Diversion of this product is unlawful and may result in the revocation of the patient's registration."
  • C. A package may contain multiple labels if the information required by this part is not obstructed.

For more information, please refer to the Minnesota Revisor of Statutes on Packaging and Labeling.

 

MONTANA

Montana currently has no cannabis labeling and packaging requirements.

For more information, please refer to Initiative Referendum No. 124.

 

NEVADA

Nevada's cannabis labeling and packaging guidelines include the following:

NAC 453A.500 Packaging: Generally. (NRS 453A.370):

  • Any product containing marijuana must be packaged in child-resistant packaging in accordance with 16 C.F.R. § 1700 or the standards specified in subsection 2 or 3.
  • Except as otherwise provided in subsection 3, marijuana-infused products in solid or liquid form must be packaged in plastic which is 4 millimeters or more in thickness and must be heat-sealed without an easy-open tab, dimple, corner, or flap so that it is difficult for a child to open and as a tamperproof measure.
  • Marijuana-infused products in liquid form may be sealed using a metal crown cork-style bottle cap.
  • Any container or packaging containing usable marijuana, edible marijuana products, or marijuana-infused products must protect the contents from contamination and must not impart any toxic or deleterious substance to the usable marijuana or marijuana product.

Labeling requirements for marijuana and related products for sale to medical marijuana dispensary (NRS 453A.370):

  • A cultivation facility or facility for the production of edible marijuana products or marijuana-infused products shall label all marijuana, edible marijuana products, and marijuana-infused products before it sells the marijuana or marijuana products to a medical marijuana dispensary and shall securely affix to the package a label that includes, without limitation, in legible English:
    • (a) The name of the medical marijuana establishment and its medical marijuana establishment registration certificate number;
    • (b) The lot number;
    • (c) The date of harvest;
    • (d) The date of final testing;
    • (e) The date on which the product was packaged;
    • (f) The cannabinoid profile and potency levels and terpenoid profile as determined by the independent testing laboratory;
    • (g) If the product is perishable, the expiration date; and
    • (h) The quantity of marijuana being sold.

For more information, please refer to Chapter 453A – Medical Use of Marijuana.

 

NEW HAMPSHIRE

New Hampshire's cannabis labeling and packaging guidelines require alternative treatment centers to provide a plan for safe and accurate packaging and labeling of cannabis, including the applicant’s plan for ensuring that all cannabis is free of contaminants.

For more information, please refer to New Hampshire House Bill 573.

 

NEW JERSEY

New Jersey's cannabis labeling and packaging guidelines include the following:

  • (b) The ATC--plant cultivation shall place a legible, firmly affixed label containing the information specified in (c) below on each package of medical marijuana it dispenses to an ATC--dispensary and shall not dispense medical marijuana if the package does not bear the label.
  • (c) The label required pursuant to (b) above shall contain the following:(d) Labeling shall be clear and truthful in all respects and shall not be false or misleading in any particular.
    • 1. The name and address of the alternative treatment center--plant cultivation that produced the medical marijuana;
    • 2. The quantity of the medical marijuana contained within the package;
    • 3. The date that the ATC--plant cultivation packaged the content;
    • 4. A sequential serial number, lot number, and bar code to identify lot associated with manufacturing and processing;
    • 5. The cannabinoid profile of the medical marijuana contained within the package, including THC level not to exceed 10 percent;
    • 6. Whether the medical marijuana is of the low, medium, or high strength strain;
    • 7. A statement that the product is for medical use by a qualifying patient and not for resale; and
    • 8. A list of any other ingredients besides medical marijuana contained within the package.
  • 1. A label containing any statements about the product other than those specified in this chapter shall contain the following statement prominently displayed, and in boldface type: "This statement has not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease."

For more information, please refer to New Jersey Register Draft Regulations for the Medicinal Marijuana Program.

 

NEW MEXICO

New Mexico's cannabis labeling and packaging guidelines include the following:

  • C. Packaging and labeling: a manufacturer applicant shall submit a description and sample of the opaque, child-resistant packaging of the concentrate or cannabis-derived product that the manufacturer shall utilize, including a label that shall contain:
    • (1) the name of the entity that produced the cannabis and the name of the manufacturer;
    • (2) a batch number or code;
    • (3) a production date or expiration date, including a “use by” or “freeze by” date for products capable of supporting the growth of infectious, toxigenic, or spoilage microorganisms;
    • (4) a description of the number of units of usable cannabis contained within the product;
    • (5) instructions for use;
    • (6) warnings for use;
    • (7) instructions for appropriate storage;
    • (8) approved laboratory analysis, including the results of strength and composition within ten percent (10%) of numbers shown on the package;
    • (9) the name of the strain, product facts, or a nutrition fact panel, and a statement that the product is for medical use by qualified patients, to be kept away from children, and not for resale; and
    • (10) the name of the department-approved testing facility or facilities used for ingredient testing, and the type(s) of testing conducted.

For more information, please refer to Title 7, Chapter 34, Part 4 – Licensing Requirements for Producers, Couriers, Manufacturers and Laboratories.

 

NEW YORK

New York's cannabis labeling and packaging guidelines include the following:

  • (iii) a standard operating procedure manual for all methods used from cultivation of the medical marihuana through packaging, sealing and labeling of each lot of medical marihuana product. The procedures shall include use of good agricultural practices (GAPs) and must conform to all applicable laws and rules of New York State.

For more information, please refer to the Summary of Express Terms for New York’s Draft Regulations.

 

OREGON

Oregon's cannabis labeling and packaging guidelines fall under 333-008-1225 Packaging and include the following:

  • (1) For purposes of this rule:
    • (a) “Child-resistant safety packaging” means:
      • (A) Containers designed and constructed to be significantly difficult for children under five years of age to open and not difficult for adults to use properly;
      • (B) Opaque so that the product cannot be seen from outside the packaging;
      • (C) Closable for any product intended for more than a single use or containing multiple servings; and
      • (D) Labeled in accordance with OAR 333-008-1220.
    • (b) “Container” means a sealed, hard, or soft-bodied receptacle in which a tetrahydrocannabinol infused product is placed prior to being transferred to a patient or caregiver.
    • c) “Packaged in a manner not attractive to minors” means the tetrahydrocannabinol-infused product is not in a container that is brightly colored, depicts cartoons or images other than the logo of the facility, unless the logo of the facility depicts cartoons, in which case only the name of the facility is permitted.
  • (2) A registered facility may not transfer any tetrahydrocannabinol-infused product that is meant to be swallowed or inhaled, unless the product is:
    • (a) In child-resistant safety packaging; and
    • (b) Packaged in a manner that is not attractive to minors.

For more information, please refer to the Final Rules for the Medical Marijuana Dispensary Program.

 

RHODE ISLAND

Rhode Island's cannabis labeling and packaging guidelines include the following:

  • (j) A description of the packaging of the useable marijuana that the compassion center shall be utilizing which shall, as a minimum, include:
    • (1) A label containing the name of the strain, batch, and quantity; and
    • (2) A statement that the product is for medical use and not for resale.

For more information, please refer to the Rules and Regulations Related to the Medical Marijuana Program.

 

VERMONT

Vermont's cannabis labeling and packaging guidelines include the following:

  • A registered dispensary shall package all marijuana dispensed in an envelope or other container used and intended for sale.
  • A label shall be affixed on the packaging of all marijuana that is dispensed. The label shall identify the particular strain of marijuana and the weight of marijuana contained within the package in gram or ounce units. Marijuana strains shall reflect the properties of the plant.
  • Additionally, the label shall contain a statement to the effect that the State of Vermont does not attest to the medicinal value of cannabis, a statement that this product is not for resale, and clearly identify “marijuana” is contained within the packaging.
  • The dispensary shall verify the amount of all marijuana dispensed.
  • Documentation shall be maintained containing at a minimum the name and registry identification number of the registered dispensary cardholders verifying the amount of marijuana and any errors identified.

For more information, please refer to the Final Proposed Rules Regulating Cannabis for Symptom Relief.

 

WASHINGTON

Washington's cannabis labeling and packaging guidelines include the following:

  • (10) Labels must comply with the version of NIST Handbook 130, Uniform Packaging and Labeling Regulation adopted in chapter 16-662 WAC.
  • (11) All usable marijuana when sold at retail must include accompanying material that contains the following warnings that state:
    • (a) "Warning: This product has intoxicating effects and may be habit forming. Smoking is hazardous to your health";
    • (b) "There may be health risks associated with consumption of this product";
    • (c) "Should not be used by women that are pregnant or breast feeding";
    • (d) "For use only by adults twenty-one and older. Keep out of reach of children";
    • (e) "Marijuana can impair concentration, coordination, and judgment. Do not operate a vehicle or machinery under the influence of this drug";
    • (f) Statement that discloses all pesticides applied to the marijuana plants and growing medium during production and processing.
  • (12) All marijuana concentrates and marijuana-infused products sold at retail must include accompanying material that contains the following warnings that state:
    • (a) "There may be health risks associated with consumption of this product";
    • (b) "This product is infused with marijuana or active compounds of marijuana";
    • (c) "Should not be used by women that are pregnant or breast feeding";
    • (d) "For use only by adults twenty-one and older. Keep out of reach of children";
    • (e) "Products containing marijuana can impair concentration, coordination, and judgment. Do not operate a vehicle or machinery under the influence of this drug";
    • (f) "Caution: When eaten or swallowed, the intoxicating effects of this drug may be delayed by two or more hours";
    • (g) Statement that discloses all pesticides applied to the marijuana plants and growing medium during production of the base marijuana used to create the extract added to the infused product; and
    • (h) Statement that discloses the type of extraction method, including any solvents, gases, or other chemicals or compounds used to produce or that are added to the extract.
  • (13) Labels affixed to the container or package containing usable marijuana sold at retail must include:
    • (a) The business or trade name and Washington state unified business identifier number of the licensees that produced, processed, and sold the usable marijuana. The marijuana retail licensee trade name and Washington state unified business identifier number may be in the form of a sticker placed on the label;
    • (b) Inventory ID number assigned by the liquor control board's traceability system. This must be the same number that appears on the transport manifest;
    • (c) Concentration of THC (total THC and activated THC-A) and CBD;
    • (d) Net weight in ounces and grams or volume as appropriate;
    • (e) Warnings that state: "This product has intoxicating effects and may be habit forming";
    • (f) Statement that "This product may be unlawful outside of Washington state";
    • (g) Date of harvest; and
    • (h) The board may create a logo that must be placed on all usable marijuana and marijuana-infused products.
  • (15) Labels affixed to the container or package containing marijuana-infused products sold at retail must include:
    • (a) The business or trade name and Washington state unified business identifier number of the licensees that produced, processed, and sold the marijuana. The marijuana retail licensee trade name and Washington state unified business identifier number may be in the form of a sticker placed on the label;
    • (b) Inventory ID number assigned by the liquor control board's traceability system. This must be the same number that appears on the transport manifest;
    • (c) Date manufactured;
    • (d) Best by date;
    • (e) Products meant to be eaten or swallowed, recommended serving size and the number of servings contained within the unit, including total milligrams of active tetrahydrocannabinol (THC), or Delta 9;
    • (f) Net weight in ounces and grams, or volume as appropriate;
    • (g) List of all ingredients and major food allergens as defined in the Food Allergen Labeling and Consumer Protection Act of 2004;
    • (h) "Caution: When eaten or swallowed, the intoxicating effects of this drug may be delayed by two or more hours.";
    • (i) If a marijuana extract was added to the product, disclosure of the type of extraction process and any solvent, gas, or other chemical used in the extraction process, or any other compound added to the extract;
    • (j) Warnings that state: "This product has intoxicating effects and may be habit forming";
    • (k) Statement that "This product may be unlawful outside of Washington state";
    • (l) The board may create a logo that must be placed on all usable marijuana and marijuana-infused products.
  • (17) Labels affixed to the container or package containing marijuana concentrates sold at retail must include:
    • (a) The business or trade name and Washington state unified business identifier number of the licensees that produced, processed, and sold the marijuana concentrate. The marijuana retail licensee trade name and Washington state unified business identifier may be in the form of a sticker placed on the label;
    • (b) Inventory ID number assigned by the liquor control board traceability system. This must be the same number that appears on the transportation manifest;
    • (c) Date manufactured;
    • (d) Best by date;
    • (e) Net weight in ounces and grams, or volume as appropriate;
    • (f) If a marijuana extract was added to the product, disclosure of the type of extraction process and any solvent, gas, or other chemical used in the extraction process, or any other compound added to the extract;
    • (g) Concentration of THC (total Delta 9 and Delta 9 THC-A) and CBD;
    • (h) Warnings that state "This product has intoxicating effects and may be habit forming";
    • (i) Statement that "This product may be unlawful outside Washington state"; and
    • (j) The board may create a logo that must be placed on all usable marijuana and marijuana-infused products.

For more information, please refer to the Washington Administrative Code 314-55-105 for Packaging and Labeling Requirements.


Date: Views: 903  Author: Jake 
Category: shatter labels Tags: marijuana laws , laws , mmj , cannabis laws , cannabis states , cannabis guide , packaging laws

* Email and comments are required. Once we receive your message we will respond as soon as possible.

ERROR